Example: Radjet

Overview

The Radjet sample consists of a 250 microns long aluminum pin with a radius of 100 microns surrounded by a 150 microns high titanium washer with an outer radius of 300 microns. The pin and washer form part of the inner surface of a hohlraum. Lasers produce a black body radiation source with a peak temperature of 190 eV within the hohlraum. The radiation creates a jet of aluminum which travels into the 500 microns thick polystyrene backing. The hydrodynamics was simulated using the ALEGRA code.

After starting SPECT3D, set up the example as follows:

Set up the Simulation Type
Set up the Geometry
Set up the Plasma Properties
Set up the Materials
Set up the Atomic Data
Set up the Kinetics Model
Set up the External Radiation Source
Set up the Detector
Set up the Backlighter
Set up the Spectral Grid
Set up the Output
Set up the Simulation Times
Run the Simulation
The Progress Monitor
Displaying the results in Visualizer

SPECT3D 20.5.0